Connections 3/8 "-3/4" (variable)
Operating pressure 3-6 bar
Ambient temperature 4 ° C-35 ° C
Water temperature 5 ° C-40 ° C Max.
Total hardness in raw water 45 ° dH
Flow at 3.5 bar to 5 liters / minute
Dimensions in cm WxHxD 46x42x11
Empty weight including accessories approx. 8 kg
The membrane meets the microbiological requirements of the EPA (Environmental Protection Agency). The membrane shows a very low pressure loss at high capacity due to an extremely large surface structure. They are suitable as germ barriers with a reduction of at least 6-log levels (i.e. >99.9999%) to prevent germ clusters, biofilm formation, etc..
CASCADA WHITE four-stage drinking water treatment system as discribed
Substructure connection set
Assembly instructions
Warranty car
PLEASE NOTE
Our high-quality DESIGNO stainless steel outlet tap is included in the scope of delivery. This can be replaced with a 3-way tap for an additional charge. You can find our NIZZA model here
To ensure that you remain on the safe side in terms of hygiene, taste and quality, we recommend changing or refilling the filter media as follows:
cw10 - semi-annual
cw20 - semi-annually
cw50 - can be refilled every 24 months
cw40 - semi-annually
CHANGE TIMES & FILTER PERFORMANCE
max. 6 months / up to 6,000 l
The change period of max. 6 months is recommended for hygienic reasons and is specified by DIN 1988/DIN EN 1717. However, an early change within this period may be necessary if the water flow is noticeably reduced. This is not a defect in the filter used, but rather an indication of an increased occurrence of fine particles in unfiltered water.
CARE/MAINTENANCE
The filter housing is largely maintenance-free. Cleaning with a soft cloth and detergent is recommended every time you change the filter cartridge. Mechanical function and wear parts (seals, valves, hoses, etc.) must be checked.
WEARING PARTS
Filter cartridge: Observe change intervals
Seals/hoses: All seals and hoses are considered wearing parts and must be replaced if necessary.